iM3 Dental Bur - Xcut Fissure Taper 701 - 19mm FG (standard length) - 5 pack
Cross cut taper fissure burs are ideal for sectioning teeth in cats and small dogs. Recommended by iM3.
- Xcut Fissure Taper 701
- Head size (mm): 012
- Head length (mm): 4.5
- Total length (mm): 19
- ISO: 500.314.168.007.012
Friction grip (FG) burs are typically used in high-speed handpieces. iM3 recommends disposing of burs between each patient or if they become dull during long procedures, to reduce turbine wear on the high-speed handpiece. These burs are intended for single use, and the cost should be factored into each procedure.
All iM3 Burs are high-quality, European-made designed for precision and reliability. Each bur undergoes a rigorous, standardised cleaning process to ensure optimal hygiene and performance: first polished in a rotary bur polisher to remove residual particles and restore surface shine; then placed in an ultrasonic cleaning unit to eliminate any remaining debris; thoroughly rinsed with hot water over a designated wastewater sink; the cleaning solution is filtered to remove contaminants; and finally, the burs are carefully dried in an oven at 80?°C (176?°F) to ensure complete moisture removal. This multi-step procedure guarantees that every iM3 Bur is clean, polished, and ready for safe and effective use.
Vet Direct offer same day dispatch for next day delivery on over 5,000 stocked items.
- Free delivery is available when you spend over £85.
- Delivery charges apply when your basket ex VAT is under £85.
- Delivery is calculated during the checkout process.
- Due to higher delivery costs, all deliveries to Jersey, Guernsey, Scottish Highlands & Isles, & None Mainland destinations will incur a deliver charge.
- Some items require shipping on a pallet for which there will be an additional charge. Customer Care are able to advise of this.
- There are additional delivery charges for products we ship directly from the supplier to your practice. These delivery costs vary dependent upon the product and courier service. Please call Customer Care on 0800 068 3300 for a quote including delivery if there is a lead time for your chosen item.
Returns
Non-faulty returns are accepted within 3 working days of dispatch subject to a restocking fee. Please contact Customer Care to arrange the return and obtain a returns number. Further information on our returns policy can be found here: Vet Direct Returns
Please note that special order items or items shipped directly from the supplier to your practice are not eligible for refunds unless faulty.
If you are not satisfied with your purchase please contact the Vet Direct Customer Care team as soon as possible for their assistance.
Average Rating
Write a Review
Write a Review
Description
iM3 Dental Bur - Xcut Fissure Taper 701 - 19mm FG (standard length) - 5 pack
Cross cut taper fissure burs are ideal for sectioning teeth in cats and small dogs. Recommended by iM3.
- Xcut Fissure Taper 701
- Head size (mm): 012
- Head length (mm): 4.5
- Total length (mm): 19
- ISO: 500.314.168.007.012
Friction grip (FG) burs are typically used in high-speed handpieces. iM3 recommends disposing of burs between each patient or if they become dull during long procedures, to reduce turbine wear on the high-speed handpiece. These burs are intended for single use, and the cost should be factored into each procedure.
All iM3 Burs are high-quality, European-made designed for precision and reliability. Each bur undergoes a rigorous, standardised cleaning process to ensure optimal hygiene and performance: first polished in a rotary bur polisher to remove residual particles and restore surface shine; then placed in an ultrasonic cleaning unit to eliminate any remaining debris; thoroughly rinsed with hot water over a designated wastewater sink; the cleaning solution is filtered to remove contaminants; and finally, the burs are carefully dried in an oven at 80?°C (176?°F) to ensure complete moisture removal. This multi-step procedure guarantees that every iM3 Bur is clean, polished, and ready for safe and effective use.
Delivery & Returns
Vet Direct offer same day dispatch for next day delivery on over 5,000 stocked items.
- Free delivery is available when you spend over £85.
- Delivery charges apply when your basket ex VAT is under £85.
- Delivery is calculated during the checkout process.
- Due to higher delivery costs, all deliveries to Jersey, Guernsey, Scottish Highlands & Isles, & None Mainland destinations will incur a deliver charge.
- Some items require shipping on a pallet for which there will be an additional charge. Customer Care are able to advise of this.
- There are additional delivery charges for products we ship directly from the supplier to your practice. These delivery costs vary dependent upon the product and courier service. Please call Customer Care on 0800 068 3300 for a quote including delivery if there is a lead time for your chosen item.
Returns
Non-faulty returns are accepted within 3 working days of dispatch subject to a restocking fee. Please contact Customer Care to arrange the return and obtain a returns number. Further information on our returns policy can be found here: Vet Direct Returns
Please note that special order items or items shipped directly from the supplier to your practice are not eligible for refunds unless faulty.
If you are not satisfied with your purchase please contact the Vet Direct Customer Care team as soon as possible for their assistance.
