Product Features
- Compact design 145x100x120mm – and large and colourful LCD display whilst remaining a compact and lightweight 1.4Kg design
- Free flow protection – The built-in flow stop feature helps reduce the risk of accidental free flow prevents free flow when the pump door is open.
- Anti-bolus function - Diminishes the volume of unwanted Bolus injected to the patient after removal of the occlusion cause.
- Air bubble detection – Ultrasound sensor detection with four levels of air in line alarm adjustable
- Occlusion pressure 3 adjustable settings 40-160kpa: 3 levels (adjustable): Low, Medium, High (Default: Medium)
- High visibility TOP light indicator, easy to see the infusion warning status from 360 degrees
- User-friendly operation
- Soft key design, easy to operate “sharp” colour screen
- Load directly the last infusion rate and volume limit
- Versatile functions
- Adjustable alarm/buzzer volume (3 levels)
- Top indicator light reflects the operation status as well as alarm case
- Cage Mount, hook and IV pole mount systems built-in with a 90-degree rotation pole clamp
- Infusion Giving Sets: Takes most infusion sets that are not too hard and have an outer diameter of 3.3-4.5 mm
- Warranty: 12 month
| Flow rate range | 0.1~1200 ml/h |
| Infusion mode | Rate mode, drip mode ( ml/h and drops/min can be switched) |
| Volume to be infused (VTBI) | 0 ~ 9999 ml |
| Volume Infused (∑) | 0 ~36000 ml |
| Infusion accuracy | ±5% |
| Applicable infusion set | Also the use of various brands of infusion giving set - with simple calibration mode |
| KVO rate | 1 ~ 5 ml/h |
| Bolus rate | 300~600 ml/h |
| Purge | 600 ml/h |
| Air bubble detection | Ultrasound sensor detection with four levels of air in line alarm adjustable |
| Occlusion pressure | 3 adjustable occlusion pressure settings: low, middle and high |
| Alarms | Visual and audible alarms: Door open, Air-In-Line, Occlusion, Infusion completion, infusion near over, Start reminder function, Low Battery, Battery depleted, malfunction etc. |
| Power supply | AC:100~240V,50/60Hz DC:12V ±1V |
| Battery | Rechargeable lithium polymer battery, 7.4V, 2100mAh Running time more than 5 hours after fully charged at a rate of 25ml/h. (10 hour recharging when the machine is turned on, 3 hour recharge when the machine is switched off) |
Purchase 50 infusion sets and receive a free Infusion Pump calibration, worth £40. Simply call Customer Care on 0800 068 3300 to order your sets.
Service Interval: 12 months
Warranty: 12 months (Battery 3 months)
Average Rating
0 Reviews
No reviews yet
Write a Review
You must be signed in to leave a review.
