MELAdest65 Distilled Water System
- Prolongs the life of your autoclave
- Stops the formation of spots on instruments
- Very cheap to produce just add tap water!
For all autoclaves it is necessary to use high quality distilled water. Note: Not all bottled distilled water is up to standard
To extend the service life of autoclaves, and to prevent the formation of spots on sterilized objects you need to use a high quality distilled water. Unfortunately, the quality of such water fluctuates, depending on its source and method of treatment. . Poor-quality water used in the autoclave can lead to the formation of residue from water contents on the instruments, in the sterilization chamber, in the water supply tank, and on all system parts which come into contact with steam. If allowed to act for long periods of time, such residue can even cause rust to form on stainless steel.
Demineralised water produced in your own practice assures uniformly high levels of water quality. MELAG water treatment system guarantees uniform high-quality water, treating water in the practice also enables an additional essential benefit: considerable saving of time and money. Water directly treated in the practice is considerably cheaper than comparable water from wholesalers or garages. With your own treatment system, you also save the time needed for buying and fetching the water, and for disposing of containers.
The MELAdest65 enables the most economical cost-saving production of distilled water for autoclaves and for all other applications in veterinary practices. Water treated in the MELAdest65 is manually filled into the water storage tank of the autoclave.
With the Melag B-Type and S-Type autoclaves, the distilled water can be automatically fed into the autoclave as needed from a container.
Technical data:
Power ratings:
- 800 W / 230 V / 50 Hz
- Output per hour: 0.7 litres
Dimensions:
- Outside dimensions: approx. ø 23 diam. x 38 cm high.
- Tank capacity: 4 litres
Back>>